![main product photo](https://www.marathonleisure.co.uk/media/catalog/product/cache/012066df34860b7994a3c8660dd91b55/r/o/roundedtank.png)
The new updated version of the wastewater kit with the macerator pump or diaphragm pump mounted and already connected to the tank. The system includes a tank, macerator, y-valve is be ordered separately in all versions, gas tank vent, activated carbon filter and control panel with a probe to check the level in the tank. Matromarine holding tank systems are moulded from linear low-density polyethylene (LLDP) resin. Polyethylene is best-suited for holding tank constructions because of its resistance to corrosion and odour permeation, and it will last longer than the life of a typical fibreglass hull. ISO/USCG compliance: MATROMARINE models are fully compliant with ISO 8099:2000(E) Standards. Odour-free design: MATROMARINE tanks have extra-heavy wall thickness to prevent odour permeation. Tanks can be fitted with an activated carbon filter that stops unpleasant odours from escaping through the holding tank vent. Multiple tank outlets: most Matromarine models are equipped with two discharge outlets: one is for connection to a deck-mounted discharge fitting and the other is for connection to an overboard discharge pump. Leak-proof design: Matromarine one-hose connection is located on top of the tank, thus eliminating all possibility of leakage due to a faulty connection below the liquid level of the tank contents. Our unique dip tube design reduces the risk of clogging while keeping the residual contents in the tank to a minimum. New fast connection in strong PVC makes this kit the most easy-mounting and complete system for the treatment of wastewaters present on the market. Available also in 24V. version upon request.
Y-valves need to be ordered apart from all waste kits
All part. numbers are equipped with 12v. electrical part, upon request all models are available also at 24v.
Polythene Waste Tanks
Complete with 4 dead female unions 3/4″ dim. 19/20 mm. and 4 dead female unions 1 1/2″ dim 38/40 mm. for rubber gasket. complies with iso 8099.
cD. 9100000547 47 lt. 480 x 400 x 330 mm – rectangular
cD. 9100000578 72 lt. 700 x 400 x 300 mm – rectangular
cD. 9000000550 50 lt. 430 x 550 x 290 mm – rounded shape
cD. 9000000598 98 lt. 430 x 1050 x 290 mm – rounded shape